$14.00
- Only suitable for experiments, not recommended for continuous use.
- Compatible with ‘PlantmateⓇ DC 5V to 3.3V 5V 6.6-12.6V DC Converter & Water Comparator Module’.
- Suction-cup can hold the water pump on a flat smooth surface stably.
- Submersible; waterproof.
- Variety Power: DC electric source, battery, or solar panel.
- Interface: Mini USB with 85 cm long cable.
Make sure the water pump is into the water when on power.
Features:
- Body: ABS material, being environment-friendly.
- Mini-USB cable: soft TPE material
- Suction-cup can hold the water pump on a flat smooth surface stably.
- Small size but strong; Low consumption & High Efficiency;
- Long time continuous working, lifespan about 3000 hours;
- Safety – no spark, Explosion-proof; Low noise about 40dB;
- Submersible, 100% waterproof; Max Working Temperature: 90 degrees;
- Wide range of working voltage; Maintenance-free;
- Variety Power: DC electric source, Battery, or Solar Panel;
- Water Sensor Plate is for detecting water purposes, it needs a capacitive sensor module (PlantmateⓇ DC 5V to 3.3V 5V 6.6-12.6V DC Converter & Water Comparator Module) which isn’t included;
- It can be used just as a water pump if detecting water isn’t part of your project.
- Be aware that the resistive sensor module may not work with this sensor plate.
| Voltage Scope (DC) | Current(A) | Power(W) | Max Water Head(M) | Max Flow Rate(L/H) | Starting Voltage | Waterproof Grade |
| 6.6V | 0.25 | 1.65 | 0.85 | 120 | 1.5 | IP68 |
Specifications:
-
- Housing material: Tough ABS
- Voltage: DC 3.3V – 6.6V
- Max Output: 120L/h
- Max Lift: 0.85m
- Stainless steel shaft
- Cable length: 85 cm
- Life Span: about 3000 hrs.
- Working: Continuous
- Heat Resistance: -20°C~60°
- Self-priming: No
- Noise: 40db MAX
- Interface: Mini-USB
- Compatible: PlantmateⓇ DC 5V to 3.3V 5V 6.6-12.6V DC Converter & Water Comparator Module’
- Compatible MCU: Arduino
- Dimensions: 52X47x26mm (LxHxW)
- The pump can be used for underwater diving and on the land type.
- Waterproof Grade: IP68
Mini-USB Cable Assignments:
| Wire | Description |
| Red | Water pump positive (“VCC” on Mini USB) |
| White | Sensor plate probe + (“D+” on Mini USB) |
| Gray | Sensor plate probe – (” D-” on Mini USB) |
| Black | Water pump negative (“GND” on Mini USB) |
Package weight: 100g
Package size: 15x10x3.6cm
Packages Content:
- 2 X Water pump
- 2 X Mini USB adapter
Reviews
There are no reviews yet.